InkJet Stencil Set 紋身轉印套裝 (Free Shipping 免費送貨)

  • $1,810.00
  • Save $110
Shipping calculated at checkout.


*** FREE SHIPPING for all Hong Kong local orders

Inkjet Stencil Set includes:

  • InkJet Stencil Ink 紋身轉印墨水 4oz. Bottle
  • InkJet Stencil-prep® 轉印預備噴霧 8oz. Spray Bottle
  • InkJet Stencils® Pacon Transfer Paper 轉印紙 8.5X11” ream - 500 sheets

Inkjet-stencil ink is a patented product by TatuYou in the U.S. 

It is designed specifically to be used with Epson Eco Tank Printer ET-2550 or ET-2750 or any other. You must use a new printer (cannot use an existing printer).
Two bottles are needed to fill all four tanks on a new EcoTank printer. 

Approximately 3,000 copies can be printed with 1 bottle of ink. 

Please read the FAQ before you buy it. 

Getting Started

  • Take the printer out of the box and keep the instruction guide
  • DO NOT power up the printer until you have filled the ink tanks
  • Put gloves on to avoid staining your hands
  • Open the cover of the printer for all four ink tanks. Remove dispensing caps from all 4 colors Epson ink bottles
  • Open the InkJet Stencil Ink and carefully pierce the foil seal with a pin or small pointed object. Place Epson dispensing cap on the InkJet Stencil bottle over the foil with black rubber washer in place
  • Dispense the ink in all four tanks with the intention of distributing it evenly, 1 oz in each tank. Each ink tanks has a mating dispensing cap that connects to the port to minimize spillage. Four ounces will not fill all tanks but will print about 3,000 stencils
  • Plug in the printer and turn it on and initiate the startup process
  • Connect the printer to your internet network You can send files to the printer from your wireless device over the WIFI network. Connect the printer to your computer with a USB cable if your computer has a USB port. USB Cable is not supplied with the printer
  • Start printing stencils

DEMONSTRATION 1

DEMONSTRATION 2

 


We Also Recommend