Inkjet Stencil Ink 轉印墨水 4 oz. Bottle
InkJet - Stencil - 4oz.
Inkjet-stencil ink is a patented product by TatuYou in the U.S. It is designed specifically to be used with Epson Eco Tank Printer ET-2550 or ET-2750 or any other.
4oz (118ml) / Made in the USA
Approximately 3000 copies can be printed with 1 bottle of ink.
Please read the FAQ before you buy it.
Getting Started
- Take the printer out of the box and keep the instruction guide
- DO NOT power up the printer until you have filled the ink tanks
- Put gloves on to avoid staining your hands
- Open the cover of the printer for all four ink tanks. Remove dispensing caps from all 4 colors Epson ink bottles
- Open the InkJet Stencil Ink and carefully pierce the foil seal with a pin or small pointed object. Place Epson dispensing cap on the InkJet Stencil bottle over the foil with black rubber washer in place
- Dispense the ink in all four tanks with the intention of distributing it evenly, 1 oz in each tank. Each ink tanks has a mating dispensing cap that connects to the port to minimize spillage. Four ounces will not fill all tanks but will print about 3,000 stencils
- Plug in the printer and turn it on and initiate the startup process
- Connect the printer to your internet network You can send files to the printer from your wireless device over the WIFI network. Connect the printer to your computer with a USB cable if your computer has a USB port. USB Cable is not supplied with the printer
- Start printing stencils
One 4 oz bottle of patented methyl violet formula for printing InkJet Stencils. Two bottles are needed to fill all four tanks on a new EcoTank printer. 4 ounces will print approximately 3,000 stencils.
- Any Epson EcoTank Printer: ET-2550, ET-2750 or any other (printer not included)
- You must use a new printer (cannot use an existing printer)
